Please use the oiler to lubricate the tool, and adjust the flow rate to 2 drops per minute. If the oiler is not used, you must inject 3-4 drops of lubricating oil from the pipe joint every day. Do not use oil with high viscosity, which will make the tool rotate abnormally. Aluminum spot welding machine
Please use an oiler to lubricate the tool, and adjust the flow rate to 2 drops per minute. If you do not use an oiler, you must inject 3-4 drops of lubricating oil from the pipe joint every day. Do not use oil with high viscosity, which will make the tool rotate abnormally. Aluminum spot welding machine
As more and more business owners move towards the brand management route, some domestic and foreign famous products have been introduced to meet the needs of different consumers. Air tools are one of them. According to reports, it is more advanced than power tools in terms of manufacturing technology, material and measurement control. Pneumatic tools, like electronic appliances and hydraulics, are one of the most effective technologies for automation of production processes and are widely used in various departments. According to statistics, in industrially developed countries, about 30% of the fully automated processes are equipped with pneumatic systems.
In toys, electronics, plastics, telecommunications equipment, small appliances, furniture and other traditional labor-intensive enterprises, has been hit the screw assembly process is the use of a hand or power granted wind approved, the other grasping the screws and lock the alignment batch mouth screw. Do "grab, move, wait, aligned" with one hand while playing the screws required for these actions, it is time-consuming accounting for one-third of the time required to hit the screw or more, especially for materials when stainless steel or copper or the like can not be adsorbed by the magnet screws, it needs more time-consuming, while each production line of screws playing station and very much.
Gas shovels and hammers are very powerful. Such tools are needed in industrial production, especially in electric welding. They are very helpful tools. During electric welding, there will be a lot of metal sparks. Adsorption on the product affects the appearance of the product and also affects the function of the product. Therefore, it is necessary to use an air shovel and a hammer to remove these hardened metals.