Considerations for piping configuration.

1. Air compression and workplace examples should be shortened as much as possible, considering whether the pipeline is drained smoothly or not

2. The main circuit forms a network for maintenance and tracking of air leakage.

3. The shorter the pipeline in the working area, the better, and the stroke is ring-shaped to reduce the pressure drop.

  air pressure

The best air pressure for pneumatic tools to work is 0.6MPA in the vicinity. If the pressure is too low, the ability of the tool will be reduced. If the pressure is too high, it will easily lead to accidents or failures.

Air consumption and air compressor energy

In order to make air tools work, a certain amount of compressed air is necessary. Basically, the air consumption of 0.1 cubic meters per minute must use a 0.75KW air compressor.

Precautions for safe use:

1. Before using the tool, please read the operating instructions to ensure safe use.

2. Before use, check whether the tool is abnormal, whether the air pressure is normal, and whether the pipe is wound.

3. When operating tools, maintenance tools or changing accessories, please wear eye masks and masks (face protection equipment) that can resist impact at any time. And when it is not working, please turn off the air source first, and unplug the tool and the air source connector.

4. Please keep a distance from the rotating shaft and accessories, and do not wear jewelry and fat clothes to use tools. Tie up long hair, scarves, ties and other easily tangled objects.

5. When operating, please wear labor protection devices and serve.

6. Please do not point the air outlet at yourself or others.

  Maintenance:

1. The air supply to the tool must be treated to ensure clean and dry.

2. Please use the oiler to lubricate the tool, and adjust the flow rate to 2 drops per minute. If the oiler is not used, 3-4 drops of lubricating oil must be injected from the pipe joint every day. Do not use oil with high viscosity, which will make the tool rotate abnormally. Aluminum spot welding machine

3. Do not throw or strike tools.